Different Hydraulic Jack Plates...

Hey fellows! Do you know that the more set-back you choose the more bow lift you'll get? There are jack plates with 4" set back 5 1/2" and 10" and more.  Therefore, we listed different hydraulic jack plates just to give you more ideas about it. If you have any questions please don't hesitate to call us at 702-582-9667 or email sales@magemarinestore.com. 

Look what we listed below:

 

This is a PL-65 Hydraulic Jack Plate 65002 that provide 5 inches of vertical travel and 5 ½ inches of set back from the boat transom and made for V-6 and smaller outboard motor applications.  

One of our customers uses this for his Rib craft 7.8 offshore RIB with 250 hp Suzuki (~270kg V-6).  The inflatable would run best at 5.5" set-back with this engine. 

This one is a PL-65 Stainless Steel Hydraulic Racing Jack Plate 65201 a stainless steel jack plate has 5 ½ inches of set back from the boat transom. It will lift a 300 HP V8's outboard motor and racing applications.

This can be used in Scorpion Rigid Inflatable Boat of 7.5 m with an Evinrude 250 DI from 2004 and was used by our customer.




This is a PL-65 High Speed Hydraulic Jack Plate 5 1/2" Set-Back 65302 gives 5 1/2 inches set back.  There is a 1-1/2" adjustment at the transom (different hole it can be mounted), 1" on the motor side and at least 1-1/2" on the motor, then once mounted the 65302 will raise the motor 5".

This is a PL-65 10" Set-Back High Speed Hydraulic Jack Plate 61302 provides 10 inches of setback. Made for V-6 and smaller outboard motor applications.

One of the motors uses for this is mercury 225 Pro xs.