9” Static Setback 90012

You got a great deal of boat with 200 HP. However, it has a 20 inch lower unit.  And your question is, “would you be able to lower the motor with the 20” lower unit to sit while the 25” lower unit sat before?”

Well, if you don’t want to tilt your motor, you could purchase the 90012 with 9”setback plate. The unit would set the motor back from the transom 9” and taper down 5-3/4. You would be able to tilt your motor some, but not all the way. When you want to come down with a motor, you will have this problem unless you set your motor back 20-26”.

This CMC 90012 jack plate for your boat has 1 ½ inches of adjustment at the marine transom and 1” of adjustment on the motor bracket.  You can use this to give a total set back of 14.5” when used with the 65201 which has 5.5” set back. One of the CMC jack plates that are made of 6160 T6 extruded aluminium alloy. Rated for V-6 and smaller boat engine applications. Dimension from top of transom to top of motor side is 5 ¾ inches.  This jack plate provides better fuel efficiency.  It has stainless steel fasteners for maximum strength and durability.

To give you this part, you can follow this link and order online: http://magemarinestore.com/9instse.html  for $303.00 and will absolutely satisfy your boating performance.