It is our job to give our customers the best quality and services they can have.  We will not let you down when choosing us to be your first boating resources. Our company will spontaneously do the job in order to provide different boat products from ARCO, CMC and CDI products.  From the products we have previously introduce. We also want you to know that we have the inboard alternators, like part no. 20100. This inboard alternator will fit many diesel engines. It has 12 volt, 70 AMP, self-exciting internal regulator, negative ground, 1 wire connection and a single groove pulley included. Don’t hesitate to check it here: http://magemarinestore.com/arinal.html and let us know if you need any assistance. Our helpful customer service will be there for you just send us via email sales@magemarinestore.com.

CMC Universal Wake Board and Ski Rack 9750

Last week of the month is here again and you’ve been looking for this Ski Rack that will hold your two wakeboards or skis. Good thing that you find us and we know what you want that’s why we are always happy to help. We are selling this rack kit that designed by CMC with polished aluminium for supreme water resistance and covered with vinyl sleeve for ultimate wakeboard protection.  You can use it for ALL boat towers with round tubing from 1 ½ to 2 inch outside diameter. Check it in our website http://www.magemarinestore.com/.

Selecting the correct battery ignition is really important. Every boater must know if it fits on the exact application of the motor to help you save money, time and effort. To make sure you get it correctly you can email sales@magemarinestore.com the serial no., HP, year and type of your motor. You can also use our website Application Guide as your help.

You can have one of our battery ignitions for Johnson/Evinrude/OMC with part no. 113-8362. The OMC motor must be 1968 to 1970 of 100 and 115 HP, for 1971 of 125 HP and 1972 of 100 and 125 HP. This is use with sensor triggering.  Minor rewiring for some of it is needed. It does not have a tachometer circuit output. The replaces part numbers are the following: 18-5748(b), 384522(c), 398362(c), ID3077(b), 381884(c), 385034(c), 398363(c), IDG3001A(c), 382478(c), 385036(a), IDD3001(c), 383298(c), 383038(c), IDD3070(b), IDG3001C(c).



OMC Battery Power Pack 113-8362



We will always feature different stators for you so you’ll know what stator fits your Mercury motor.  Aside from other stators we introduce here in our blog, we also have Stator for your 40 AMP Mercury motor part no. 174-9610K2. This stator is universal design that replaces both 2 and 4 wire. You can use this for your 6 cylinder mercury motor applications. CDI Electronics designed this for boaters with installation instructions included. Here is your guideline for part numbers that replace your old or damaged stator: 
•398-9610
•398-9610 A3
•398-9610 A5
•398-9610 A6
•398-9610 A9
•398-9610 A14
•398-9610 A17
•398-9610 A19
•398-9610 A22
•398-9610 A24
•398-9610 A33

The CMC designed wiring harness for any CMC jack plates and tilt trim units.  When you realized that your PT-35 or PT-130 wiring harness has been damaged you can go to our website to buy part no. 7014F-7123-7124. It includes new toggle switch and toggle switch boot. You will be satisfy with our prices and the quality that you can trust!! Just follow this link to order online: http://magemarinestore.com/cmcjaplandti.html

 

Another outboard starter we are selling is part no. 3421. It has 10 tooth drive gear.  This will fit your Yamaha outboard motor. When buying this starter, the year of your Yamaha outboard must be 1984 to 1997 with the horsepower of 9.9 to 15 and 1988-1998 for 25 horsepower. You can also use this to replace your Hitachi engine starter S106-07B, S106-07E and S106-07F.

Transom wedges or Set back Spacers for PT 130

You’re having a hard time mounting your PT-130 Tilt Trim and trying to find out what’s best to do. CMC marine developed the transom wedges or set back spacer to easily mount your PT 130 and achieve satisfaction. This wedges are used as an aid for boats with insufficient transom angle or for boat having planning problems at low speed.  It has a unique design that allows you to use them as setback spacers, by simply inverting 2, 4, and 6 sets. The hole is design to fit the same pattern as the jack plate transom bracket and standard monitoring mounting.  With 2 degree transom wedges that is easy to install and designed to give extra positive or negative trim to your outboard motor. You can have this for very affordable and convenient to use. Start ordering now using this link: http://magemarinestore.com/trwesespcm.html and stop worrying about installing your PT 130!