It is our job to give our customers the best quality and services they can have.  We will not let you down when choosing us to be your first boating resources. Our company will spontaneously do the job in order to provide different boat products from ARCO, CMC and CDI products.  From the products we have previously introduce. We also want you to know that we have the inboard alternators, like part no. 20100. This inboard alternator will fit many diesel engines. It has 12 volt, 70 AMP, self-exciting internal regulator, negative ground, 1 wire connection and a single groove pulley included. Don’t hesitate to check it here: http://magemarinestore.com/arinal.html and let us know if you need any assistance. Our helpful customer service will be there for you just send us via email sales@magemarinestore.com.

CMC Universal Wake Board and Ski Rack 9750

Last week of the month is here again and you’ve been looking for this Ski Rack that will hold your two wakeboards or skis. Good thing that you find us and we know what you want that’s why we are always happy to help. We are selling this rack kit that designed by CMC with polished aluminium for supreme water resistance and covered with vinyl sleeve for ultimate wakeboard protection.  You can use it for ALL boat towers with round tubing from 1 ½ to 2 inch outside diameter. Check it in our website http://www.magemarinestore.com/.

Selecting the correct battery ignition is really important. Every boater must know if it fits on the exact application of the motor to help you save money, time and effort. To make sure you get it correctly you can email sales@magemarinestore.com the serial no., HP, year and type of your motor. You can also use our website Application Guide as your help.

You can have one of our battery ignitions for Johnson/Evinrude/OMC with part no. 113-8362. The OMC motor must be 1968 to 1970 of 100 and 115 HP, for 1971 of 125 HP and 1972 of 100 and 125 HP. This is use with sensor triggering.  Minor rewiring for some of it is needed. It does not have a tachometer circuit output. The replaces part numbers are the following: 18-5748(b), 384522(c), 398362(c), ID3077(b), 381884(c), 385034(c), 398363(c), IDG3001A(c), 382478(c), 385036(a), IDD3001(c), 383298(c), 383038(c), IDD3070(b), IDG3001C(c).



OMC Battery Power Pack 113-8362



We will always feature different stators for you so you’ll know what stator fits your Mercury motor.  Aside from other stators we introduce here in our blog, we also have Stator for your 40 AMP Mercury motor part no. 174-9610K2. This stator is universal design that replaces both 2 and 4 wire. You can use this for your 6 cylinder mercury motor applications. CDI Electronics designed this for boaters with installation instructions included. Here is your guideline for part numbers that replace your old or damaged stator: 
•398-9610
•398-9610 A3
•398-9610 A5
•398-9610 A6
•398-9610 A9
•398-9610 A14
•398-9610 A17
•398-9610 A19
•398-9610 A22
•398-9610 A24
•398-9610 A33

The CMC designed wiring harness for any CMC jack plates and tilt trim units.  When you realized that your PT-35 or PT-130 wiring harness has been damaged you can go to our website to buy part no. 7014F-7123-7124. It includes new toggle switch and toggle switch boot. You will be satisfy with our prices and the quality that you can trust!! Just follow this link to order online: http://magemarinestore.com/cmcjaplandti.html

 

Another outboard starter we are selling is part no. 3421. It has 10 tooth drive gear.  This will fit your Yamaha outboard motor. When buying this starter, the year of your Yamaha outboard must be 1984 to 1997 with the horsepower of 9.9 to 15 and 1988-1998 for 25 horsepower. You can also use this to replace your Hitachi engine starter S106-07B, S106-07E and S106-07F.

Transom wedges or Set back Spacers for PT 130

You’re having a hard time mounting your PT-130 Tilt Trim and trying to find out what’s best to do. CMC marine developed the transom wedges or set back spacer to easily mount your PT 130 and achieve satisfaction. This wedges are used as an aid for boats with insufficient transom angle or for boat having planning problems at low speed.  It has a unique design that allows you to use them as setback spacers, by simply inverting 2, 4, and 6 sets. The hole is design to fit the same pattern as the jack plate transom bracket and standard monitoring mounting.  With 2 degree transom wedges that is easy to install and designed to give extra positive or negative trim to your outboard motor. You can have this for very affordable and convenient to use. Start ordering now using this link: http://magemarinestore.com/trwesespcm.html and stop worrying about installing your PT 130!

Mercury Stator 174-3996

Your 1970 Mercury 7.5 HP needs to replace your old stator with new stator part no. 174-3996. This stator will replace part numbers 18-5855, 336-3692, 336-3996, 336-3996A7, 339-3962A4, 339-3996A4, 339-3996A6, 339-3996A7, 9-25501. Two insular blocks with part no. 994-3981 are included. Note that the insulator blocks included with this stator is important. You are strongly advised to install them and closely inspect the point wires for cracking or racing. This system operates at a much higher voltage than the normal systems and what would be acceptable on other systems will cause problems.

For technical information do not start and run engine on a flushing attachment or ear muffs and active the kill circuit.  

Visit MagemarineStore to order this item.

We also sell part no. 3420 aside from part no. 3412 of ARCO products.  Another outboard starter replacement for your 2 stroke Yamaha that should be 25 to 40 HP. Two stroke Mariner of 20 to 40 HP and Hitachi S108-80, S108-80A, S108-80B. It has 11-tooth drive gear.  The price is very affordable compare to others. You can use our very useful website to order part no. 3420 online: http://www.magemarinestore.com/ar34oust2.html. If you are looking for the correct part for your motor the application guide is made for you http://www.magemarine.com/arco/  or you can just email us the serial#, model#, how much HP and type of your motor at sales@magemarinestore.com.

A failure directly caused by rust, corrosion or submersion is not covered by warranty.

ARCO treats every component with special rust and corrosion resistant coatings to prevent water damage. However, it is impossible to protect the unit from direct contact with water. Therefore, ARCO maintain their products in the way that their customers grant satisfaction when it comes to quality. Like their outboard stator with part no.  3412. This starter will fit your Suzuki, Tohatsu and Nissan engines. Engine usually use for 30 and 40 HP. The part numbers that replace the Hitachi are S108-94, S108-112, S108-120. Use also with 9 tooth gear. If you have questions on shipping, feel free to email at sales@magemarinestore.com or contact us at 702-582-9667.

CMC PT-35 Owner’s Manual

Manual is used to understand the system and process of one unit or any equipment. If you are about to install or use equipment you can always use the manual as your help. Let say,  you are going to use your boat and you bought a new PT-35 Tilt Trim unit and you don’t know how to install it properly. It seems like you needed a manual with a very clear explanation. Now you can have the CMC PT-35 Owner’s Manual for your convenience. It’s only $12.52. Just click it here: http://magemarinestore.com/ptowma52.html and get the information you will need.

A switch box is often needed in a boat, car, stereo and any machines. The switch is used to control the motions of machines, interrupting the current of electrical component or diverting it from one conductor to another. CDI manufactured different switch box to fit for boat engine. MagemarineStore will help you find your switch box. One of the switch boxes we have is part no. 114-2803 to use for Mercury engine with 95 HP and 110 HP. Fits for year 1966-1967. The Switch box and ignition coil are attached to a mounting plate for easy installation. This unit is a replacement to the original case. It does not contain a rev limiter or tach circuit. You can replace your old mercury switch box with part numbers 332-2803A3 and 332-2803A4.  

ARCO BI-0702 Battery Isolator

Do you know that the most common battery isolator is the one alternator, two battery units? But it doesn’t matter how many batteries are connected in parallel to the battery 1 or 2 terminal. Remember, when batteries are connected in parallel, they become one large battery. With the use of one alternator, the two battery isolator with a battery selector switch will allow both banks of batteries to be charged regardless of what position the battery selector switch is in. The two alternators or two battery isolators allows both alternators to charge both batteries. In the event of one alternator failure, both batteries would be maintained by the working alternator.

One of these common battery isolators manufactured by ARCO is this part no. BI-0702. This isolator has one alternator and two batteries with a maximum 70 AMP electrical current.  Our cost is only $55.37. We offer discounts if you requested to ship USPS service, just let us know.  Visit this link now http://magemarinestore.com/arbais.html.

9” Static Setback 90012

You got a great deal of boat with 200 HP. However, it has a 20 inch lower unit.  And your question is, “would you be able to lower the motor with the 20” lower unit to sit while the 25” lower unit sat before?”

Well, if you don’t want to tilt your motor, you could purchase the 90012 with 9”setback plate. The unit would set the motor back from the transom 9” and taper down 5-3/4. You would be able to tilt your motor some, but not all the way. When you want to come down with a motor, you will have this problem unless you set your motor back 20-26”.

This CMC 90012 jack plate for your boat has 1 ½ inches of adjustment at the marine transom and 1” of adjustment on the motor bracket.  You can use this to give a total set back of 14.5” when used with the 65201 which has 5.5” set back. One of the CMC jack plates that are made of 6160 T6 extruded aluminium alloy. Rated for V-6 and smaller boat engine applications. Dimension from top of transom to top of motor side is 5 ¾ inches.  This jack plate provides better fuel efficiency.  It has stainless steel fasteners for maximum strength and durability.

To give you this part, you can follow this link and order online: http://magemarinestore.com/9instse.html  for $303.00 and will absolutely satisfy your boating performance.

Racks for Wakeboard Tower

Boats are designed to have accessories like wakeboard tower and wakeboard tower needs board racks to holds two wakeboards and skis. CMC manufactured wakeboard racks from polished aluminium for supreme weather resistance and covered with vinyl sleeves for ultimate board protection.  Racks fit most towers with round tubing. The round tubing outside diameter is from 1 ½ to 2 inch. But before you install it you must have horizontal bar already available on your existing tower. You can easily and quickly install it. Check our website MagemarineStore.com and visit our wakeboard racks with a regular price of $70 and now it's only $59.00. Hurry up!

CMC Universal Wake Board and Ski Rack 9750

Hydraulic Actuator

Hydraulic Actuator is a mechanical device that is used for controlling a mechanism for fluid liquid power to do in a simple work. The fluid is then filtered and re-pumped. The path taken by hydraulic fluid is called a hydraulic circuit of which there are several types for the hydraulic fluid to do work, it must flow to the actuator and or motors, then return to its reserver. Mechanical Actuators operate by conversion of rotary motion into linear motion while the Hydraulics is used for the generation, control, and transmission of power by the use of pressurized liquids.Now in our website http://www.magemarinestore.com/ you can replace the Hydraulic Actuator of your jack plate and tilt trim unit.You can also order other boat parts by visiting our website and check our products that you will need in your boat,just visit our website and search the name of the product that your looking for.

CMC Hydraulic Actuator 7050

A gauge is a helpful device use in measuring or testing instrument.  Typically we can find it in a boat, car or any type of vehicles. It is use to determine the height of the motor without looking back, allowing the driver to maintain a forward view at all times. When use it in a boat, the gauge indicates the presence or the quantity level of water in the sea.  The measurement of water level is really important. It can help you identify what speed to maintain for your safety.

 There are several kind of gauges to buy.  In fact MagemarineStore sells different gauges for your boat. We have this gauge kit 6077 for CMC jack plates. Another one is the conversion gauge kit 51207 for CMC PT-130 tilt trim units use only not for PT-35 units. Its sending unit is totally fastened and water resistant, which removes any moisture problems. The up down toggle switch of this gauge is standard equipment. To have a sealed, drip proof and mounted in the dash boat, you must have this water pressure gauge 20320. Usually the maximum engine height is determined by the hole slot and engine water pressure at top end speed. If the engine is adjusted too high there will be loss of water pressure to the engine at top end speed/or the prop will cavitate coming out of the hole. This pressure gauge is recommended on high performance applications when the motor is raised to extreme heights. This allow for constant monitoring of the cooling system.

Purchase a gauge for your safety and convenience. You can visit our different gauges here: http://www.magemarinestore.com/japlandtitru.html .

We have this ignition 113-1726 for your OMC/Johnson Evinrude for only $100. This includes cover & gasket. It will fit your 1997 to 1978, 3 cylinder and 1976-1978 V6 engine applications. Note that this unit replaces part numbers: 581334, 581551, 581552, 581726, 582057 (Power Pack 3 w/cover & gasket), 18-5763and 18-5765.

Having trouble on how to install this ignition 113-1726 for your 3 cylinder OMC/Johnson Evinrude?
Read the procedure below:

1. Remove the old power pack cover.
2. Disconnect all wires from the old power pack.
3. Remove the old power pack and save the mounting bolts.
Check for DC voltage on the kill (stop) wire (usually Black/Yellow) with the key-switch in the on and off position. At no time should
you see over 2 volts DC on this wire as severe damage to the power pack can occur.
5. Install the new power pack using the original bolts.
6. Reconnect the wires according to the connection guide below (also located on the cover).
7. Install the new cover and gasket using the new screws included with the new pack.

How about for your 6 Cylinder Engine?
Here:

1. Remove the old power pack cover.
2. Disconnect all wires from the old power pack. Watch for the connections from the Timer Base to the pack.
3. Remove the old power pack and save the mounting bolts.
4. Check for DC voltage on the kill (stop) wire (usually Black/Yellow) with the key-switch in the on and off position. At no time should
you see over 2 volts DC on this wire as severe damage to the power pack can occur.
5. Install the new power pack using the original bolts.
6. Connect the stator, kill and coil wires to the new pack.
7. Connect the White Timer Base wire to the Black/White Terminal.
8. Connect the Blue Timer Base wire to the White/ Black Terminal for # 1.
9. Connect the Violet Timer Base wire to the White/ Black Terminal for # 2
10. Connect the Green Timer Base wire to the White/ Black Terminal for # 3.
11. Reconnect the wires according to the connection guide located on the cover.
12. Install the new cover and gasket using the new screws included with the new pack.

If you want to order just click this link: http://www.magemarinestore.com/omcig117.html

Anything that you need for your boat? Just one click at http://www.magemarinestore.com/ and you will discover it. Take some time to make a tour on our website and you will find this trigger 134-6454 for only $84.00. It fits 45, 50, 80 and 85 HP of mercury motor. Replaces part numbers 77000A1 & 96453A2.

Now is the time to throw your old, damaged and rotten triggers. Come visit this link: http://www.magemarinestore.com/cdimeretr131.html

Isn't time for you to replace your Chrysler/Force engine ignitions?

Replace your Chrysler/Force ignitions, battery ignitions, magneto ignition, magnapower capacitor, rectifiers, stators and triggers. Here is the link: http://www.magemarinestore.com/chigpr.html

If you need battery ignition pack 115-3301 click this link : http://www.magemarinestore.com/cdichfobaigp.html and see what replaces your motor. This fits Chrysler/Force outboard motors for only $223.00.
Note that this unit does not have a tachometer circuit input.

Would you like to get discount via USPS shipping? Email us at sales@magemarinestore.com.

Sometimes problems come unexpectedly. Do you have life problems or boat problems? To solve either love or boat problems, you can use these three questions in order to solve it: First what could I do? Second, what could I read? And third, who could I ask? MagemarineStore can help you with your boat problems, you can read information of our different boat products. You can fix your boat parts or replace it with the new one . And you can ask questions by sending an email at sales@magemarinestore.com

 Meanwhile, if you need gear assembly for your boat or ARCO products? Here is the quickest link to view information: http://www.magemarinestore.com/ardvhedureid.html.

So order now and fix your boat. Then leave all your problems by riding on it!

Popular jack plates just made for you. Experience great performance. Replace your old and damaged outboard motor parts. Today is the right time for you to get your boat parts, visit our website
 http://www.magemarinestore.com/. Great selections of jack plates, tilt trim units, wakeboard tower, jack plate accessories and parts, CMC ignitions and ARCO products are waiting for you!

If you have any questions feel free to email us at sales@magemarinestore.com. We are always here to help you.

What's going on with your boat now? Try check it and you'll probably need some parts to fix it. Visit our website http://www.magemarinestore.com/ with various selection of ARCO tilt trim just for you. One of our ARCO tilt trim motor product is item #6204 that fits OMC / Johnson Evinrude 982058 & 982706 motors. Consists of 3 wire connections and 2 bolt mount. Can be replaced with Prestolite EVD4002.

Please see more information here: http://www.magemarinestore.com/ar62titrmo.html

Always check our website for more boat parts just for you. http://www.magemarinestore.com/

Our company is offering coupon code discount for any CDI items who requested USPS shipping service in any part of the US.  Take advantage of this and save money on shipping. Go to our website http://www.magemarinestore.com/. See our affordable prices of CDI products for your Mercury, OMC Johnson Evinrude & Chrysler Force. Email us  at sales@magemarinestore.com if you want to ship your item USPS.
Featured Product Today :

Battery Ignition Pack part #115-3301 for Chrysler/Force engines that is only $223.00 and save on shipping using our coupon code. Hurry up! Use this link to order online: http://www.magemarinestore.com/cdichfobaigp.html

How was your weekend? Did you go on boating? Maybe some of you had troubles with their boat and need to replace some part of it. Well you can visit http://www.magemarinestore.com/.

We have this Ignition Sensor item #133-5008 for OMC / Johnson Evinrude motors that fits 1970-72 with 100, 115, 125 HP. You can use this for 4 cylinder OMC Marine using the battery CD power pack ignition that replaces part numbers 384461 and 385008. If you are unsure what part that you need. You can check our CDI application guide here: http://www.magemarinestore.com/cdiapplication.html or just email sales@magemarinestore.com the serial #, model #, year, type and HP of your motor. Then, we can help you identify the correct part for your motor. 

CMC Jack Plate and Tilt Trim Wiring Harness

How was your boating? Weekend is near. I know some of you are preparing to relax and enjoy. Well boating would definitely the best. Did you see the part that you need? Did you check it on our website? If not visit us at www.magemarinestore.com. Check your boat and fix it today!

Our featured product today is this CMC Jack plate and tilt trim wiring harness 7014F-7123-7124 for only $136.00. This item is use for CMC jack plate and tilt trim unit (PT-130 /  PT-35) . It includes new toggle switch and toggle switch boot.

We trust CMC when it comes on producing best quality of jack plate and tilt trim wiring harness for over 6 years in the business now. So hurry up! Click this link: http://magemarinestore.com/cmcjaplandti.html Order it now!

ARCO Ignition Pack for Chrysler/Force Motor

Happy Monday everyone! A fresh day of the week to start boating. You can check our website www.magemarinestore.com if you need some parts for your boat.

We feature this NEW Ignition pack item#114-4952 that fits 1992-95 with 40 and 50 HP Chrysler/Force engines for only $227.50. A quality designed by CDI Electronics for boaters.

Replaces part numbers:
    * 18495A4
    * 18495A5
    * 18495A6
    * 18495A8
    * 18495A11
    * 18495A13

See more information about this by visiting this link: http://magemarinestore.com/cdimeresw114.html and order now online!

Lists of ARCO Outboard Starter Repair Parts

Can't find what starter you need for your outboard motor? We have listed ARCO outboard starter repair parts for Mercruiser, OMC/Johnson Evinrude, Force/Chrysler, Suzuki and Many small perkins diesel for your convenience. 

• ARCO Outboard Starter Repair Part DV325
• ARCO Outboard Starter Repair Part DV326 
• ARCO Outboard Starter Repair Part DV358 
• ARCO Outboard Starter Repair Part DV359  
• ARCO Outboard Starter Repair Part DV360  
• ARCO Outboard Starter Repair Part DV361  
• ARCO Outboard Starter Repair Part DV362  
• ARCO Outboard Starter Repair Part DV365  
• ARCO Outboard Starter Repair Part DV366 
• More of these will be posted. If you want to see more and order now, kindly use this link: http://magemarinestore.com/oustrepa.html  

Please remember when ordering drive assemblies for O.M.C starters, be aware that some OMC outboard starters use a 2-piece drive assembly; older OMC starters use a 1 piece drive assembly. Order the correct drive. They are not interchangeable.

If you are confuse what part you need you can always trust our website www.magemarinestore.com. You will see information of which ARCO product suits your boat and the most cheaper price you can get. 

Start replacing your old and broken outboard starter now! Email us at sales@magemarinestore.com for any inquiries.

Mercury Motor Extension Cable

Need some extension for your Mercury motor? Can't find where is the best one? Are you in rush looking for it?

When you tried connecting the cable, it's short and wanted to locate the outside EFI of your mercury engine. Or probably your cable extension was damage and need to buy a new one. Stop worrying. At this moment after reading this blog, you'll start relaxing on your boat going to your favorite place or having a great time in the ocean with your family, friends and love ones. We are selling this extension cables EFI 6’ for Mercury motors part #451-9601. Click this link: http://magemarinestore.com/me6exca45.html. It's only $125.00 and if you want to save more we can get you less shipping cost simply email sales@magemarinestore.com. We also ship anywhere in the country.

CDI Electronics manufactured excellent quality of cable extension for Mercury motor. We trust their line of developing products and had proven for 25 years. That's why we at Magemarinestore chose them and started selling their products for a longer time.



Mercury 6' Extension Cable 451-9601



Many companies used several technologies to produce the best quality of goods. Competition in selling spread throughout the world. Provide worldwide shipping, sale, discount, surprises and many more scheme in order to build a good relationship with their customers. Being on the top required a long term of services. Patient, gaining trust and best customer service are essential to achieve business success.  As part of worldwide companies www.magemarinestore.com wants to obtain it. We started selling CMC, CDI Electronics and ARCO Marine products to help people find their boat needs. And this blog is also created to be able to give information and 100% of satisfaction to our customers. We assure that the prices of our products are economical. To save more you can ask for less shipping cost at sales@magemarinestore.com. We care that’s why we find ways to help you enjoy your boating.

We offer a complete line of marine electrical parts. Please check one of our CDI products. Find several selection of triggers for 2 cylinder mercury motors here: http://magemarinestore.com/2cylinder.html.

See images of trigger below:




Mercury Trigger Sensor 134-5744-2

 

 

Mercury Trigger Sensor 134-9527-2

  

Mercury Trigger 134-9021-2

  

Battery Isolators

Battery Isolators are solid-state devices which allow electrical current to flow in one direction only, thus permitting the alternator to be connected directly to two batteries without fear of one higher charged battery discharging into the lower charged battery. Both batteries are always being charged automatically, in proportion, to their needs, whenever the engine is running. When battery isolators are used in conjunction with selector switches, it is not necessary to change the switch position to provide charging of both batteries. isolators provide proportioning of the output or charging current on the alternator to the batteries as required, regardless of switch position.

A battery isolator will let you completely discharge one battery without discharging the starting battery. It is used in many vehicles like boats, airplanes and others that require multiple batteries and backup sources of power. Of course we want to avoid any damages or any problem with our vehicles. To ensure that our vehicles have sufficient power to start the engine and re-charge the batteries the battery isolator can help.


If you decide to order one of our battery isolators just use this link: http://www.magemarinestore.com/bais.html. We have great selections and best prices. For further assistance, please don't hesitate to email us at sales@magemarinestore.com. We also ship items worldwide.

Images of Battery Isolators:

ARCO Battery Isolator BI-0702

ARCO Battery Isolator BI-0702-4

Rev Limiters

The boat engine is build to speed up and achieve great performance of boat. For all boaters who want to gain more satisfaction. We must prevent our engine from any damage. A Rev Limiter can help you. Rev limiter is a device fitted to an internal combustion engine to restrict its maximum rotational speed. It is also use to increase fuel efficiency of a boat.

MagemarineStore offers you affordable prices and quality rev limiters for your mercury engine. Available Mercury rev limiters are part #144-1889-52 for 5800 RMP, #144-1889-55 for 6600 RPM & 144-1889-51 for 5200 RPM.

To quickly locate your rev limiter, use this link: http://magemarinestore.com/mererevli.html

Mercury 5800 RPM Limiter 144-1889-52



Mercury 5200 RPM Limiter 144-1889-51

Mercury 6600 RPM Limiter 144-1889-55

We need tools and equipment in order to produce an item. Every part of an item has a respective role to make the whole equipment functional. It becomes valuable to us.  To make sure that the item is working, we need to test it.

So, www.magemarinestore.com supplies choices of boat equipment & tools just for you. We fully equip different multimeter accessories, meter accessories & spark tester, testers, pressure & vacuum testers and tools to satisfy the demands of boaters worldwide.

We have the multimeters DVA adapter 511-9773 & accessory 511-9773NL, Piercing probe set multimeters 511-9770. This piercing probe set contains 1 red and 1 black probe. Moreover, the multimeter spark tester 511-9766, spark tester for 8 cylinder motors 519-S48, multimeter spark tester for 4 cylinder motors 519S48H, multimeter pack load resistor 511-9775, multimeter Ampmeter adapter 511-9772, multimeter breakout box 511-9756, multimeter Remote DVA test harness 511-9776, spark plug wire puller 551-9765, Johnson/Evinrude remote starter 511-6996, Mercury remote starter 511-7900, battery CD tester 511-9701, Mercury trigger tester 511-9710, optical sensor tester for 4 & 6 cylinder engines 511-4017, CDM Module Test Harness 511-5207A1, CDI flywheel holder 551-5110. Also several pressure and vacuum tester can be found 551-34PV, pressure and vacuum parts such as Metric adapter 551-334M, Suzuki Adapter 551-334S, hose assembly tools and equipment 551-33HA, tilt trim harness relay 852-9810, gearcase filler 551-33-1, check valve-assembly 551-33CV, gearcase filler thread nozzle 551-33TN, gearcase filler unthreaded nozzle 551-33UN, tilt trim relay 852-9809, dielectric gease 991-9705.

For quick view and order online, simply use this link: http://magemarinestore.com/testequipment.html

Should you have any queries about these products, or you wish to find out how to order, please email us at sales@magemarinestore.com.

Trouble with your Oil warning module

To complete and run an outboard engine the oil warning module must be a part of it. And if you're not familiar with the oil warning module, it is a small black box on starboard side of outboard motor with 5 wires coming out of it. You will find it below the starter or the temperature sending unit back by the spark plugs.

If you experience an alarm sounds when you turned on your boat engine that means an oil warning module is defective. If the sounds continuously happen. Try using this simple troubleshooting:

1. Disconnect the two White/Blue sensor wires from the oil warning module and retest.
2. If the horn stops, the sensor in the oil tank is likely bad.
3. If the horn still sounds, disconnect the Tan wire from the module and see if the horn now stops sounding. If the warning horn sounds with the two White/Blue sensor wires disconnected, but stops when the Tan wire is disconnected, the oil warning module is defective.

If you really need to replace your oil warning module. Visit this link: http://magemarinestore.com/mereoilwamo.html. See part number 114-4857-16, 41470a26 & 414-70a27 and know what fits your Mercury outboard motor. 

To save on shipping, simply email sales@magemarinestore.com to get you a quote.

See picture of OIL WARNING MODULE 114-4857-16:

Mercury Oil Warning Module 144-4857-16

Get your Trigger/Timer Base for Boat Engine

Giving up what to do on your boat because you are out of time looking for the right trigger/timer base for your Johnson/Evinrude, Mercury Mariner, Force/Chrysler engines? CDI Electronics has a precision trigger/timer base that will provide many years of dependable service.

In fact www.magemarinestore.com offers several trigger/timer base that will fit your motor boat. Including trigger part #134-6452 that features straight linkage arm, fits for 4 cylinder Mercury motors with 45, 50, 80 & 85 horse power for only $67.00. Check this link to see what replaces this part: http://www.magemarinestore.com/cdimeretr4cy1.html. Trigger part #134-6454 that hooked linkage arm, use for 4 cylinder mercury motors with 45, 50, 80 & 85 hp for only $84.00. A mercury trigger sensor part #134-5744-2 is use for 2 cylinders, year 1996-97 mercury motors with 40 and 50 horsepower. Another one is trigger part #134-6456 for 6 cylinder mercury motors with 90, 115, 150, 135, 175, 200, 225 HP Marathon, X34, X36, 150/200/225 ProMax, 150/200/225 Super Magnum, Merc Formula I for only $121.00. These are only some of our triggers. Well, if you are hurrying and tired of finding the right trigger/timer base. Simply visit this link: http://www.magemarinestore.com/meretrandtrd.html. Then, you’ll be satisfied with our prices, quality and services.

Images of Trigger/Timer Base:

Mercury Replacement Trigger 134-6452

Mercury Replacement Trigger 134-6454

Mercury Replacement Trigger 134-7029-4

Mercury Replacement Trigger 134-8303-4

Mercury Replacement Trigger 134-9021-4

Mercury Replacement Trigger 134-4513-4

Inboard Starter

Having problems with your inboard starter all the time?

The outside appearance shows to be fined but you can’t tell what’s causing the trouble. Check your starter carefully, inside and outside. Then you might find out, maybe a water intrusion. This is the #1 problem arises on a starter failure. Or maybe incorrect wirings, it can cause burnouts. Or maybe loose battery clamps, the cable terminals must be tight. If the ends of the clamps touch at the top, disconnect the cable clamps and shave the ends of the clamp jaws with a file so there is a gap. Or maybe loose connections. Be sure to check all the terminals and connections and make sure they are all clean and tight.  Or maybe this is the right time to replace your inboard starter and buy a new one. So, start shopping now and visit http://magemarinestore.com/inst.html. Get your ARCO inboard starter for MERCRUISER, O.M.C., COBRA, YAMAHA, VOLVO PENTA, CRUSADER, MARINE POWER and other outboard motors with best price ever!

See these pictures of ARCO Inboard Starter:

ARCO Inboard Starter 12200

 VOLVO-PENTA Inboard Starter 10113

ARCO Inboard Starter 12100

Regulators/Rectifiers for Mercury Outboard Motors

Regulator rectifier is use for boats, cars and any electronics equipment. It is a combined unit and does the rectifying part as well as the regulation part of a battery charging system. Failure can be happened anytime. Make sure you always get ready and be prudent where to buy a great deal and best quality. Also before installing it check, if the part is suitable to your needs.

Researching a reliable supplier in the market is not easy. Therefore, www.magemarinestore.com is here to make you happy and satisfy with the best service you can achieved.

MagemarineStore is selling affordable, high quality and various choices of regulator rectifier that fits to any of Mercury outboard motors. Go check this link and see the truth: http://www.magemarinestore.com/merevore.html. If you want to save on shipping, please email us at sales@magemarinestore.com for a cheaper cost.

Some pictures of our regulators rectifiers:

CDI Mercury Replacement Rectifier/Regulator Kit 194-2115K1

CDI Mercury Replacement Rectifier 154-6770