Different Manual Jack Plates

There are several manual jack plates you can find. It is easily adjustable from top to bottom, made of 1/2" 6061 T6 extruded aluminum alloy and provides better fuel efficiency. Below are the lists of different manual jack plates to speed up your boat and give you more ideas about it.

Satisfy your boat needs. Find great prices of manual jack plates by visiting our website now!

The Stainless Steel Manual Jack Plate provides 5 ½ “set back from the boat transom and gives 5” of vertical adjustment. Rated for V-8 motors and racing applications and made of stainless steel fasteners for maximum strength and durability.

Would you like to order this online? Click Here..

The Manual Jack Plate 61012 provides 10” setback, gives 5” of vertical travel and rated up to 300 HP, V-6 outboard motor applications.  One of our customer used this for 2005 225 Mercury Optimax 30 inch shaft and it weighs 540 lbs. Mounted on the transom of a 232 Mako.

Would you like to order this online?

Click Here..

2 Piece Manual Jack Plate 40012 provides 4" of set back from the boat transom. The 40012 has 3-sets of mounting holes on the transom side of the unit so you will have 1-1/2" of adjustment up or down at the transom. Generally the top of the transom side would be mounted even with the top of the transom of the boat. Once all is mounted you have 5" of adjustment up.

Would you like to order this online?

Click Here.. 

2 Piece Manual Jack Plate 55012 provides 5 1/2 inch of setback from the boat transom.  Our customer used this for 1996 26’ Wellcraft Scarab Sport Center console and with a 2000 Mercury EFI 225 , 15" transom with a 20" shaft motor 25hp and engine size with 150 hp or a 175hp 4 stroke.

If you want to to raise and leave in one spot this jack plate will work.
Would you like to order this online? Click Here ..

About Hydraulic Jack Plate



 The hydraulic transom jack plate is the "cadillac" of jack plates. This unit mounts between your transom and your outboard motor and moves the motor either up or down with the push of a button from the helm. The hydraulic operated transom jack can be purchased with a position indicator so you can tell the height of your motor without having to bring it all the way up or down. Hydraulic jack plates are manufactured in the United States by several manufacturers including: CMC, Bob's Machine Shop, Panther Marine, Stainless Marine, TH Marine, Land and Sea, Slidemaster, and Detwiler.


One of the  hydraulic jack plates best seller and NEW is PL-65 High Speed Hydraulic Jack Plate 5 1/2" Set back 65302. You can find it here: http://magemarinestore.com/plhs5sehisph.html. This features Full Stroke in 8 seconds!  Rated for V-6 engine and smaller applications. Provides you 5" of vertical travel with 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket. It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX)." A TOTAL OF 8" OF POSSIBLE ADJUSTMENT!


For more options, click here: http://magemarinestore.com/hydraulic-jackplate.html and also http://www.proboatparts.com/CMC/CMC-Hydraulic-Jack-Plate-c12/

Compare Manual Jack Plate to Hydraulic Jack Plate


Comparing the difference between manual and hydraulic jack plate is essential when choosing what’s best for your boat. That’s why CMC developed these two jack plates to provide you with the best quality and affordable to your budget. The only difference is that a CMC Manual Jack Plate has the same design and construction features as the transom hydraulic jack plate without the convenience of automated adjustment. If you want a boat motor performance enrichment, but don't have the enough budget for hydraulic transom jack plate unit then the ML-65 Manual Jack Plate is probably the exact jack plate you are looking for. These manual jack plates for boat motor provide the same benefits to the hydraulic jack plate units. However, since you cannot lift or lower the motor as you are moving you will not get the same performance enhancement associated with a CMC hydraulic jack plate unit.



Manual Jack Plate with 10" Set back 61012

   
This picture is one of the manual jack plate that has 10" setback to your transom. If you are interested purchasing this you can visit this link: http://www.magemarinestore.com/ml10semajapl.html
To find selected items for manual and hydraulic jack plate here:
http://www.magemarinestore.com/cmc-transom-jackplate.html

Other resources: http://proboatparts.com/

About Manual Jack Plate...

Do you know what is a manual jack plate?

A manual jack plate will set the motor back away from the transom 5 1/2 inch which will get your prop away from the boat in what is called "cleaner water". There is less water turbulence 5.5" farther aft than at your boat transom and the water goes under your transom, then sweeps up toward your prop. This will allow you to raise your motor on the average of 3" higher than you can at your transom and still have water pressure and a good "bite" with your prop. Also, the 5.5" set-back provides leverage to get the bow of you boat up with less trim allowing you to lift your motor higher. Less boat in the water and less engine lower unit in the water equates to more top end speed, better fuel economy and more prop clearance in shallow water.

 If you do not want to spend the bucks for the hydraulic unit, you can get a manual jack plate for about 30% of the cost of the hydraulic unit.   While it will not adjust engine height while on the water, it will allow you to fine tune to the most desirable engine height for your particular needs.


One of the most popular manual jack plates that all boaters use is this #65012 made by CMC Inc. We receive several orders of this. So, if you are ready to order it online just click this link:  http://magemarinestore.com/mlmajapl65wi.html. For questions and help, please don't hesitate to call at 702-582-9776 or email at sales@magemarinestore.com and we'll be happy to assist you.




Manual Jack Plate 65012

 Please see selection of manual jack plate using this link:
http://magemarinestore.com/majapl.html

Hello Everyone!

First, thank you for giving us some time to visit our blog and even our website http://www.magemarinestore.com/. As part of our business concern, we would like to help our visitors to know about our company and provide a precise information on what is the importance of jack plate, tilt trim, wakeboard tower and other marine electrical parts for the boat.

Let me start by introducing what a jack plate can do for your boat. Do you know what is a jack plate?

The transom jack or "jack plate" for outboard motor can serve many purposes for your boat. It can help to improve fuel economy, increase your boat's maximum speed on the water, increase your propeller clearance, and help you get up on plane faster. Jack plates are easy to install and can be done in a few hours with basic tools and the help of a friend. There are 2 different kinds of jack plates: hydraulically operated and manually operated. The names should speak for themselves. Hydraulic jack plates are useful when it is necessary to get a boat on or off plane in shallow waters.


See more information here: http://www.magemarinestore.com/cmc65002.html